Listing of Accompishments

Professional Honors

• Named as Senior Fellow of the Society, of the Society of Plastics Engineers in 2005 for lifetime contributions in the field of plastics.

Patents

• Coholder of the FOGCUTTER tm a fogless dental mirror 4,568,281.
• Sole holder of the TV. LOCKEY — an electrical locking device, pending.
• Coholder SOFTTUF process patent — Mattel Toy.

Professional Memberships/Associations Accomplishments

• Board Chair, Plastics Design and Development Division of the Society of Plastics Engineers 2006-2007
• Board Member, Rocky Mountain Division, Society of Plastics Engineers, 2001-2005
• Board Member, Plastics Design and Development Division of the Society of Plastics Engineers 2003, 2004, 2005
• Instructor, Larimer County Community College, “Advanced Plastics Processing’ 1996
• Co-chair “Tooling and Part Engineering: Choices, Standards, and Economies” National Plastics Exposition 1994
• Senior Member, Society of Plastics Engineers. Member since 1970
• Member Society of the Plastics Industries Member since 1989
• Member, Society of Manufacturing Engineers since 1990
• Member American Mold Builders Association
• Member of the Board of Directors of the Rocky Mountain Chapter of the Society of Plastics Engineers 1992-1996.
• Member, Society of the Plastics Industry Speakers Bureau.
• Member, Society of Plastics Engineers Speakers Bureau.
• Former member, Hewlett Packard’s Plastics Corporate Design, Tooling and Manufacturing Strategy Task Force.
• Member, Hewlett Packard’s Corporate Sheet Metal Commodity Team. 1980-1990
• Member, board of directors of So. Calif. Chapter Society of Plastics engineers 1977-1981

Other

• Faculty Instructor, Front Range Community College, Fort Collins CO Since 1996
• Faculty Instructor, Nypro Institute, Clinton MA since 1994
• Guest Lecturer Injection Molding Bi-Annual Conferences since 1991
• Instructor/Consultant for the Canadian Plastics Institute, Toronto Ontario, Canada since 1985
• Guest lecturer/seminar leader at the Plastics Designer’s Forum biannual conference since 1987
• Consultant for TelTech Inc. a technical knowledge reset service, Minneapolis, MN. Since 1978
• Expert witness in product liability trials since 1991.
• Guest Lecturer at: Colorado School of Mines, Golden, CO, Stevens Institute, Paramus, NJ; Colorado State
• University, Fort Collins, CO; University of Colorado, Boulder, CO; McGill University, Montreal, Quebec, Canada.

SEMINARS

Creator and instructor of the following seminars:

• DISIPLINED/SCIENTIFIC MOLDING - One Day Seminar
• MANAGEMENT TRAINING IN PLASTICS - Two Day Seminar
• INJECTION MOLDING OPTIMIZATION - Half Day Seminar
• PRODUCTIVITY IMPROVEMENT IN INJECTION MOLDING Ã- One Day Seminar
• COST REDUCTION IN INJECTION MOLDED PARTS - One Day Seminar
• SURVIVAL TECHNIQUES FOR SMALL MANUFACTURERS - One Day Seminar
• TOOLING STANDARDS - One Day Seminar
• TROUBLESHOOTING FROM DESIGN TO PROCESSING - One Day Seminar
• FROM QC TO SPC - Setting up and running a QC program. One day Seminar
• FUNDAMENTALS OF INJECTION MOLDING - Mastering injection molding. Two Day Seminar
• ZERO DEFECTS — Quality improvement in manufacturing. 4 Hour seminar
• BASIC INJECTION MOLDING/BASIC TROUBLE SHOOTING - Mastering the injection molding process. One Day Seminar
• SETTING UP YOUR OWN QC PROGRAM - Up grading a quality control program. One Day Seminar
• QUALITY STATISTICS — Advanced statistical quality control
• EXECUTIVE SEMINARS FOR PLASTICS - Project engineering and management of plastics programs. Up to three days
• TRYOUTS, STARTUP AND QUALIFICATIONS OF MOLDS. One Day Seminar.
• SCIENTIFIC MOLD QUALIFICATIONS One Day Seminar
• EXPERT MOLDING One Day Seminar

• Instructor for the Israeli Rubber and Plastics Institute
• Instructor for Technical Service Engineers for SABIC Corporation
• Seminar Instructor for Society of Plastics Engineers
• Instructor for three day Quality Control Seminars held bi-annually at PLASTIC FAIR both east and west coast since 1983.
• Seminar Instructor of Plastics Fairs and Plastics Product Designer’s forum since 1989
• Instructor for Canadian Plastics Institute, Toronto, Ontario Canada, since 1990
• Lecturer Society of Plastics Engineers National Speaker’s circuit 1984 to present
• Contributing editor to Hewlett Packard’s Supplier Quality Handbook 1990 Edition
• Guest Speaker: Society of Plastics Engineers, Society of Manufacturing Engineers, Rocky Mountain Council for competitive products, American Society of Production Control, American Society of Mold Builders, Society for the Plastics Industry.
• Instructional computer programs
• Quick-Sight Estimator - A stand alone computer program that estimates part and mold costs.
• Capacity Planning for Injection Molding - Two spreadsheet programs to determine the size and capacity of new tooling and how to determine the capacity requirements of a molding plant. Copyright 1995
• ToolTrack - a computer spread sheet program to track the progress of the building of injection molds and report to customers. Copyright 1994
• Instructional Videotapes Training tapes used for in-house instruction or in conjunction with seminars.
• Practical Mold Installation A guide to Change-Overs, Start Ups and Operations
• A training video with accompanying text book on the procedures of mold installation and efficient production in English, Spanish, French and German. Copyright 1993
• Mold Setting A guide to setting molds
• A training video with accompanying text book on the procedures of mold installation. Copyright 1993